← back to Homesonspec

build-loop: add Taylor Morrison (state-scoped) + Ashton Woods (metro primitive) — DTD 3/2; both were inactive-not-broken, verified 100% priced/addressed

c9a622d6cd6ceedc7c885210d0f06f82f9ba9ba6 · 2026-07-28 10:58:15 -0700 · Steve Abrams

Files touched

• M scripts/build-loop.sh

Diff

commit c9a622d6cd6ceedc7c885210d0f06f82f9ba9ba6
Author: Steve Abrams <steve@designerwallcoverings.com>
Date:   Tue Jul 28 10:58:15 2026 -0700

    build-loop: add Taylor Morrison (state-scoped) + Ashton Woods (metro primitive) — DTD 3/2; both were inactive-not-broken, verified 100% priced/addressed
---
 scripts/build-loop.sh | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/scripts/build-loop.sh b/scripts/build-loop.sh
index c39bc831..aedd8e18 100644
--- a/scripts/build-loop.sh
+++ b/scripts/build-loop.sh
@@ -66,6 +66,7 @@ sweep_adapter() {
       tri) TRIPOINTE_STATE="$(lc "$S")"   TRIPOINTE_PAGE_LIMIT=$CAP CLI tri-pointe-site | sed "s/^/  tri $S: /" ;;
       len) LENNAR_STATE="$S"              LENNAR_PAGE_LIMIT=$CAP    CLI lennar-site     | sed "s/^/  len $S: /" ;;
       dw)  DAVIDWEEKLEY_STATE="$(lc "$S")" DAVIDWEEKLEY_PAGE_LIMIT=$CAP CLI david-weekley-site | sed "s/^/  dw  $S: /" ;;
+      tm)  TAYLORMORRISON_STATE="$(lc "$S")" TAYLORMORRISON_PAGE_LIMIT=$CAP CLI taylor-morrison-site | sed "s/^/  tm  $S: /" ;;
     esac
   done
 }
@@ -74,10 +75,19 @@ sweep_adapter() {
 # so we don't hammer the same national endpoint 40x. Toll Brothers publishes ~all in one run.
 sweep_national() { CLI toll-brothers-site | sed "s/^/  tol NATIONAL: /"; }
 
+# metro-iterating adapters (footprint = METROS, not states) — scoped to served metros only
+# (Cody WAF-lesson from the start). Ashton Woods publishes per-metro quick-move-in homes.
+sweep_metros() {
+  for M in atlanta austin dallas houston san-antonio phoenix orlando tampa raleigh nashville; do
+    [ -f "$STOP" ] && break
+    ASHTONWOODS_METRO="$M" ASHTONWOODS_PAGE_LIMIT=$CAP CLI ashton-woods-site | sed "s/^/  aw  $M: /"
+  done
+}
+
 # wait until no other adapter run is in flight (avoid same-source races)
 while pgrep -f "cli.ts --adapter" 2>/dev/null | grep -qv "^$$\$"; do sleep 20; done
 
-for k in dr-horton-site kb-home-site pultegroup-site tri-pointe-site lennar-site toll-brothers-site david-weekley-site; do
+for k in dr-horton-site kb-home-site pultegroup-site tri-pointe-site lennar-site toll-brothers-site david-weekley-site taylor-morrison-site ashton-woods-site; do
   PSQL "update \"SourceRegistry\" set active=true, health='HEALTHY', \"consecutiveFailures\"=0 where key='$k';" >/dev/null
 done
 
@@ -94,6 +104,8 @@ while [ ! -f "$STOP" ] && [ "$sweep" -lt "$MAX_SWEEPS" ]; do
   sweep_adapter tri &
   sweep_adapter len &
   sweep_adapter dw "TX FL NC AZ GA SC IN" &   # David Weekley: only its 7 served states
+  sweep_adapter tm "AZ TX FL CO NC GA SC NV CA WA OR" &   # Taylor Morrison: its ~11 served states
+  sweep_metros &                                          # Ashton Woods: metro-iterating (~10 metros)
   # Toll = communities-only (0 spec homes until wave-2 QMI); its data changes on the order of
   # weeks, so refresh ~daily (every 8th ~2.5h sweep) not every sweep (DTD 4/5 throttle 2026-07-28).
   if [ $((sweep % 8)) -eq 1 ]; then sweep_national & fi

← de14cc6d engine viewer: empty 'errors: []' no longer flagged red (hon  ·  back to Homesonspec  ·  build-loop: add 3 missing AW metros (charleston/jacksonville 53fe5d85 →